Governor and Tecjet Overhaul Process


In our workshop we overhaul all type of Woodward Governors and actuators. We overhaul other governors brands (RE, Heinzmann, Diesel Kike) as well.

We also overhaul and repair the Woodward gas flow metering valve, i.e. Tecjet. Below some pictures of the overhaul process of the Tecjet.

The layout in our workshop is setup in a way that the governors follow a specific path through the shop like receiving, pre-testing, disassembly, cleaning, assembly, testing, paint spray, final inspection and packaging. This setup is made to achieve the most practical flow in the repair process and separate the dirty incoming products from the clean work spaces like the assembly and test area.

Overhaul process


In this area we receive and store the governor or Tecjet. Each overhaul job gets is it own label which correspond with the work order and provides details such as customer name, order number, part and serial number and work scope.

Pre Testing

If necessary the governor will be pre tested to check all settings like speed setting, limiter-, speed switch-, and shutdown adjustments. All application related adjustments will be noted to adjust the governor after the overhaul in a way it will be ready for your application.


In this area the governor or Tecjet will be completely disassembled. During the disassembly "always replaced parts" like bearings, o-rings, gaskets, etc. will be separated from the rest.


In our cleaning area all parts will be cleaned, paint stripped and if necessary de-rusted. Together with our supplier we developed special detergents and procedures. All parts will be cleaned excellent but will not be damaged by means of corrosion or deposit.


After cleaning, all parts will be inspected on wear. All worn part will be replaced by genuine parts from the original governor manufacturer like Woodward, Regulateurs Europa, Heinzmann or Zexel. All "always replaced parts" will be replaced as well.


In our assembly area all cleaned part and new parts will come together and the governor will be assembled by technicians who has been trained by the governor manufacturer. The assembly area is separated in special work stations for every specific governor like PG- and UG- stations.

All equipment and tooling used to assemble the governors is developed to meet the high standard which is required by the governor manufacturers.


After the assembly of the governor it will be tested on functionality and adjusted following the manufacturers test protocol for the specific governor. Some governors will be adjusted according the customer requirements, which has been noted during the pretest or given by the customer.

The test facilities can be seen as an engine simulator and are supplied by the governor manufacturers.


After the test and adjustment procedure the governor will be decreased, pre-treated and paint sprayed.
Most governors will be paint sprayed in the governor manufacturers color. On special request we can deliver the governor in other colors like Cat-yellow or MTU-silver.

Final Inspection

Before packing all governors will be checked on possible inferiorities and completeness like decals, protection caps and customer belongings like levers, tubing, connectors, etc.


Now the governor will be packed in a special box for each different governor. The boxes and inlays are especially developed for each different governor to give it full protection during transportation worldwide.


The governor is now ready to ship all over the world wherever our customer want us to send it to, or it can be hand carried by one of our service engineer to mount it on the application and make the final adjustments.

A Turner Group Company
Copyright Turner ECS
Contact us
Turner ECS Netherlands

Dirk Storklaan 76
2132 PX Hoofddorp
The Netherlands
Tel: +31 (0) 23 566 23 00
Fax: +31 (0) 23 564 27 27
24/7 phone number: +31 (0) 6 57 59 22 50


Turner ECS United Kingdom
Unit 1
High Carr Business Park
Staffordshire ST5 7XE
United Kingdom
Tel: +44 1782 569190

Turner ECS Abu Dhabi
Bin Hamoodah Building
7th Floor, Sh. Khalifa Street
P.O. Box 203, Abu Dhabi
United Arabic Emirates
Tel: +971 02 626 7912
Fax: +971 02 626 9239
Turner MCS Italy
Polo Tecnologico della Brianza Edif. 9 Lab 3
Via Lavoratori Autobianchi 1
20832 Desio
Tel: +39 0362 62 12 40
Turner ECS Germany

OhmStraße 2
D63225 Langen
Tel.: +49 (0) 6103 73 299 0
Fax: +49 (0) 6103 73 299 60

Turner ECS Saudi Arabia
Office No. 702 - 7th Floor Al Mousa Tower
6682 Al Amir Turki-Al Yarmok District
Al Khobar - Kingdom of Saudi Arabia
General: +966 138343734
Mobile: +966(0)504827421
Turner ECS Qatar
P.O Box 153
Ein Khalid Commercial Building
Doha, Qatar
Mob. : +974 3338 0351
Technical Support

For technical support please contact us at

Per aiuto in Italiano potete usare